
Presented by GAMMA, BEST Ent. Mobili-fi and Industry Experts
Join industry leaders, AHJs, integrators, and engineers for two full days of code-driven, real-world training designed to prepare you for ERRCS, DAS, and in-building public safety communication challenges.
Grab Your
Ticket now!

Hands-On Skills You Can Use Immediately
This isn’t a theory-only event. You’ll get real-world training with real tools — from cable prep and sweep testing to DAS installation and commissioning. You’ll leave confident, capable, and ready to apply your skills on the job the very next day.
Learn Directly from Industry Leaders
Train with instructors who work in the field, not just teach it. Our sessions are led by respected DAS engineers, public safety system experts, and NICET-certified professionals who understand your challenges — and how to solve them.
Get Aligned with NICET Certification Requirements
We break down what you need to know to pursue your NICET IB-PSC certification, and even simulate performance tasks that you can document toward your certification journey.
Master Code Compliance & AHJ Expectations
Understand the latest NFPA, IFC, and local AHJ standards — and learn how to meet them. From plan review to final inspection checklists, you’ll gain the knowledge and documentation skills to pass with confidence.
Build a Trusted Network of Industry Peers
Through curated networking events, VIP experiences, and partner engagement, you’ll connect with integrators, system designers, and vendor reps across the DAS ecosystem — turning contacts into collaborators.
Elevate Your Value in the Marketplace
DAS University graduates walk away with field-ready knowledge, hands-on experience, and technical credibility. Whether you’re seeking a promotion, bidding on more advanced work, or prepping for NICET, this training sets you apart.






Learn directly from the nation’s leading ERRCS & DAS experts — professionals who have designed, installed, and inspected systems in the most challenging real-world environments.

All over the States, our 2026 Training Camp Tour brings hands-on, code-driven instruction to cities across the U.S., making top-tier public safety communications training accessible to you.

Master the latest NFPA and IFC code requirements while gaining practical field skills — from site surveys and grid testing to system optimization and troubleshooting

Connect with AHJs, integrators, engineers, and contractors who are shaping the future of in-building public safety communications.












What You’ll Learn:
Dive deep into the core principles, codes, and compliance strategies that govern in-building public safety and cellular DAS systems. Day 1 sets the technical foundation, builds code fluency, and prepares you to meet AHJ and NICET expectations with confidence.
Key Topics Covered
Radio & RF System Fundamentals
Understand how radio systems work inside buildings, including the impact of RF (radio frequency), interference, signal loss, and antenna placement. Learn to calculate and manage link budgets, signal paths, and gain/loss.
Decibels & Signal Measurement
Decode dB, dBm, and dBi — understand how signal strength is measured and what acceptable thresholds look like in public safety environments.
DAS Components & Signal Flow
Explore the full signal chain: BDAs, amplifiers, couplers, antennas, splitters, coax and fiber cabling — and how they work together to meet code.
Site Survey & Baseline Testing
Learn how to conduct RF site surveys, measure off-air signals, document existing conditions, and perform baseline testing as required by code.
Codes, Standards & AHJ Requirements
Full walkthrough of national fire and communication codes (NFPA 72, NFPA 1225, IFC, FCC Part 90). Learn how to design and install with AHJ inspections in mind.
Plan Review Requirements
Discover what documentation must be submitted for permit approval — including floor plans, RF reports, and system diagrams. Learn how to assemble a compliant submittal package.
Qualifying Designers & Installers
Understand the credentials and certifications required to work on public safety DAS. Learn how NICET, jurisdictional licensing, and design authority come into play.
NICET Certification Process (IB‑PSC)
Get clarity on how to pursue NICET certification, what counts as valid field experience, and how to align training with certification levels.
AHJ Inspection Checklist Walkthrough
Go step-by-step through an actual AHJ inspection process — learn what they test for, how they test it, and how to pass on the first try.
Acceptance Testing Procedures
Learn to perform and document uplink/downlink coverage tests, verify isolation, and confirm battery backup compliance as part of final system sign-off.
Monitoring & Ongoing Testing
Get introduced to system monitoring strategies, semi-annual and annual testing protocols, and how to maintain long-term code compliance.
Lifecycle Planning & Project Execution
Understand how to design for the full lifecycle — from planning and permitting through installation, inspection, re-certification, and service.

Access: Included with all student registrations
Location: TBA (based on host city)
Unwind, Compete & Connect
We’re flipping the script on traditional networking. After a day of high-powered learning, join us for an exclusive evening of fun, food, and face-to-face industry connections — hosted at a dynamic local venue (such experiences will include Topgolf, go-karting, axe throwing, and live sports games).
Break the ice with hands-on games and challenges
Make lasting connections with fellow integrators, vendors, and trainers
Enjoy casual drinks and bites, on us
Network without the name tags — just good energy
This is not your typical mixer. It’s about building real community, not just contacts. Bring your game face and join us!

What You’ll Learn:
Day 2 shifts from theory to execution — you’ll be hands-on with tools, cables, connectors, test equipment, and commissioning processes. This is where book knowledge becomes jobsite confidence. You’ll gain best practices for clean installs, signal integrity, and project close-out that meets code and performance expectations.
Key Topics Covered
Coaxial Cable Prep & Handling Techniques
Learn how to properly cut, strip, and prep coaxial cable for DAS and BDA systems. Understand jacket types, bend radius limits, and physical cable protection methods for field durability.
Connectorization & Termination
Perform hands-on connector installation using manufacturer-approved tools. Get direct feedback on proper torqueing, pin alignment, and how to avoid common mistakes that lead to impedance mismatch or failure.
Cable Sweep & Return Loss Testing
Learn how to use sweep testers to validate cable runs. Perform and interpret S-parameter readings, locate reflection points, and verify installation quality to prevent costly rework.
RF Site Survey Methods
Dive deeper into field testing techniques using signal meters, spectrum analyzers, and PIM testers to validate performance before and after installation. Understand how to document coverage gaps and interference sources.
DAS Installation – Best Practices
Get step-by-step instruction on correct mounting, grounding, routing, and labeling for DAS components. Learn how to ensure clean, organized installations that are serviceable, safe, and compliant with code and manufacturer standards.
Installation “Do’s & Don’ts”
Review real-world examples of installation errors, shortcuts that lead to failures, and what inspectors flag most often. Learn the critical quality checkpoints to include in your own process.
Hands-On Commissioning & Activation
Walk through the activation of a BDA/DAS system — including setting gain levels, verifying signal strength at endpoints, checking isolation, and completing initial performance validation.
Final Testing & Close-Out Packages
Understand how to complete AHJ-ready close-out documentation, including test results, site photos, floor plans, and system settings. Learn how to prepare for a successful final walk-through.
Field Troubleshooting Scenarios
Engage in common issue simulations, like interference, gain overlap, or dead zones — and learn structured troubleshooting techniques to diagnose and resolve issues quickly.

Access: VIP ticket holders only
Location: Secret location revealed on Day 2
Intimate. Elevated. Industry Access Like Never Before.
Your VIP experience culminates in a private dinner gathering designed for deeper connection with the DAS University inner circle.
Dine at a handpicked, upscale venue, exclusive to VIPs
Connect directly with lead instructors, elite partners, and industry decision-makers
Trade insights, share strategies, and forge meaningful alliances
Enjoy premium hospitality in a relaxed, small-group setting
This dinner isn’t just a perk — it’s an investment in long-term relationships and high-value collaboration.









Conference for creatives that focuses on community and unforgettable experiences.
DAS University Live Summit: 2026 Training Camp Tour
The DAS University Live Summit: 2026 Training Camp Tour is the premier nationwide public safety DAS & ERCES training and networking experience.
After a sold-out 2025 event, we’re expanding to 11 cities across the U.S. — bringing together fire marshals, AHJs, integrators, engineers, and public safety professionals for hands-on training that’s transforming the way in-building communication systems are designed, tested, and enforced.
Each two-day event delivers an immersive Training Camp experience, combining technical education, code enforcement, installation workshops, and industry networking — all designed to strengthen communication reliability for first responders.
The 2026 Training Camp Tour will take place in 11 major U.S. cities:
Dallas • Orlando • Phoenix • Elizabeth (NJ) • Denver • Salt Lake City • Minneapolis • Seattle • Nashville • Atlanta • Orange County / Los Angeles
Each stop includes two full days of accredited training, live demonstrations, and networking.
The DAS University Live Summit is built for:
Authorities Having Jurisdiction (AHJs) & Fire Marshals
Code Officials & Inspectors
System Integrators & DAS Installers
RF Engineers & Project Managers
Professionals pursuing NICET or ICC continuing education credits
Attendees will gain in-depth, real-world training on:
NFPA 1225 and IFC 510 compliance and enforcement
ERRCS/DAS system design, installation, and testing best practices
Cable prep, connector installation, and sweep testing techniques
Identifying signal interference and architectural RF challenges
Navigating the NICET In-Building Public Safety Communications certification process
Every participant receives an official DAS University Certificate of Completion verifying:
16 CEUs approved by the International Code Council (ICC)
16 CPD Points recognized by NICET (National Institute for Certification in Engineering Technologies)
These credits are fully verifiable and help maintain your professional certifications and credentials.
We’ve made professional development more accessible than ever:
General Admission: Two full days of training starting at just $600 — an unheard-of value for a national, accredited public safety communications course.
Code Officials:
• Day 1: FREE
• Full Two-Day Access: Only $250, including lunch and evening networking access.
Sponsoring the DAS University Live Summit: 2026 Training Camp Tour gives your brand nationwide visibility and direct access to decision-makers and industry influencers in every major U.S. market.
Sponsors gain credibility, networking access, and lead-generation opportunities that go beyond a traditional booth — positioning your company as a national leader in public safety communication.
All ticket and sponsorship sales are final.
If you’re unable to attend, your registration or sponsorship can be transferred to a future DAS University event of equal or lesser value.
For assistance, please contact [email protected] with your registration details, and our team will help schedule your transfer.
© 2025 DAS University - All Rights Reserved. DAS UNIVERSITY is a 501 (c)(3) organization